How to Restore Trex Decking

1. Use Repair Kit

The first way to restore Trex decking is to use a special repair kit. This repair kit can deal with various scratches and splits.

Make sure you choose a repair kit that provides wax applicator sticks. Choose a wax that has the color closest to the deck.

In addition, it is also important to have scratch pads in repair kits. Use everything in the repair kit to repair the scratch and splits on the rex decking, which will be explained in the next point.

2. Use Sandpaper and Scratch Repair Pad

In the next step, you can use sandpaper to smooth the scratch. Then you can apply Wax to the scratch in a back-and-forth motion.

However, scratch sizes larger than 0.64 cm should not use this method. You need to replace the board with a new one.

3. Apply Wax

At this stage, you can immediately apply Wax to the scratched area. Use the tip of the wax stick for the application process.

When waxing, make sure you only use a small amount of Wax. Apply Wax until it is in good condition at the same level as the trex decking surface.

Do this process carefully so that the amount of excess Wax is not excessive. If the excess is too much, then the excess cleaning process will also take more time.

4. Rub Advantages of Wax

Another way that you should not forget when applying how to restore Trex decking is to remove excess Wax. The cleaning process can be done using the applicator.

The best way to hold the applicator is with the thumb and index finger. Use back-and-forth motions for the best cleaning.

Make sure you’ve removed all the extra Wax. In carrying out this process, you should not press the applicator too much because it can remove the Wax that is useful for covering the scratch.

If it disappears, you have to repeat the steps of giving Wax again.

5. Replace the Board

You find the Trex decking is scratched quite deep and wide. You buy a new board to replace the old one. You simply order a new board through a trusted supplier.

If you don’t want to wait long for the availability of a new board from the supplier, you can also try to buy it from the manufacturer.

When ordering a new board, you must adjust its size to the existing decking. The matching process is not only about size but also related to color.

No need to rush into ordering new decking. You can look for it online and consider its quality and price. Try to keep ordering new boards from the nearest area so that shipping costs are not expensive.

There is nothing wrong with asking for recommendations from your acquaintances if anyone has information on purchasing a new board.

6. Design with a Pencil and Cut with a Hand Saw on a New Board

You have bought a new board with matching size and color. Now it’s time for you to take a pencil and make a design on the board.

Draw three equal intervals on the new board using a ruler. The process of drawing the design must be a vertical line so that you can divide it into 3 of the same size. This method is also the easiest to divide the board into 3.

Recommend working with a hand saw to cut the board into three equal parts. Follow the design you made earlier when cutting with a hand saw.

Make cuts in a straight cut-down direction. Make sure the cutting direction is straight so the direction will always be parallel.

Use scratch-resistant gloves when cutting with a saw. These gloves can prevent you from getting scratched or cut.

Before even sawing, you should always wear a mask and goggles. Mask can protect your lungs from the danger of sawdust particles. Google can protect your eyes also from sawdust particles.

7. Remove the Old Board

At this stage, you need to remove all old damaged boards to be replaced them with new ones immediately. Easiest release process with lift the board.

This movement can separate the board from the metal tabs that act as the board clamping system. Keep the old board until you have a chance to get rid of it. Use a hammer to remove the metal tabs attached to the old board.

You can do the metal removal process by hitting the tabs three times. If you have hit him three times without success, you can hit him up to 5 times.

If you have successfully removed the tabs, later you can install a new board more easily.

8. Attach the New Board to the Decking Bagian

You’ve picked up the tabs on the old board. Now it’s time for you to install the new board. The installation process is enough to put the new board on the old board that has been removed.

You need to make sure that the size and color match the board beside it. The same board size will make it easier for you to install.

At the same time, the same color allows the look of the Trex decking to remain beautiful to look at. Of course, it will be a little disturbing if someone installs a board with a different color.

Use the pry bar to install a new board. Using the pry bar is to place the tip between the new board and the other board.

Next, pull back the pry bar carefully. You need to use light pressure to pull back the dry bar. If the installation is incorrect, you can simply position the pry bar to slide the new board.

9. Install the Screws Using a Drill

You have finished positioning the new board in its place. The last step of how to restore Trex decking you need to do is to install the screws using a drill.

The process of installing screws is also carried out on the base. The placement of the screws needs to be at an angle of 45 degrees from the board.

Leave a Comment

Your email address will not be published. Required fields are marked *